PlantLinc^TM 5000 Industrial Wireless Serial Radio Modem for the 900 MHz ISM Band

PlantLinc^TM 5000 Industrial Wireless Serial Modem (model PLR5000) is an industrial serial RS232 radio modem designed for cost-effective, short-range PLC communications up to 4 miles. It operates in the license free 902-928 MHz band and uses frequency hopping transmission techniques for excellent reliability in noisy plant environments. It is a cost effective alternative to cable installation, trenching and leasing expensive phone lines to remote locations.

PlantLinc 5000 may be used for in-plant applications including PLC networking, data collection, mobile systems (cranes, conveyor systems, warehouse automation) and outdoor SCADA communications for remote pump stations and sub-stations. It supports all common serial protocols including DF1, Modbus ASCII, Modbus RTU, DNP 3.0 and Optimux with data rates up to 38.4 Kbps.

PlantLinc 5000 is field configurable and supports a number of operating modes including Master, Remote, Store-and-Forward Repeater and Remote/Repeater mode for added flexibility. It can accommodate most plant wireless projects using easy to install omni directional antennas or yagi antennas when a stronger signal is required.

PlantLinc 5000 is housed in a small, rugged, DIN rail mountable metal enclosure. It is rated for operation at -20 to +75°C (-4 to +167°F).

Industrial Applications

• Communications to PLCs on moving platforms

• In-plant SCADA network communications

• Remote pump stations/substations communications

• Maintenance of remote PLCs

• Factory floor for data collection

For longer range, higher data rate and/or extended temperature range, see Data-Linc Group's SRM Family of license-free wireless modems.

Download a printable pdf (937K) version of this PlantLinc 5000 data sheet.
To read pdf files you need to have Adobe Acrobat Reader installed on your PC.

PLR5000 Specifications

Operating Frequency
License-free, 902-928 MHz

Transmitter
Rated Range. 4 miles (6.4 km), line-of-sight distance
using omni directional antennas
Output Power. 200mW maximum (+23 dBm)
Modulation. Spread Spectrum, GFSK
Spreading Code. Frequency Hopping
Hop Patterns. 15 (user selectable)
Occupied Bandwidth. 230 KHz

Receiver
Sensitivity. -106 dBm @ 10^-6 raw BER;
Selectivity. 20 dB @ fc +-115 KHz; 60 dB
System Gain. 129 dB

RF Data Transmission
Error Detection. 32 Bit CRC
Data Encryption. Substitution Dynamic Key
RF Data Rate. 38.4 Kbps

Interface
RS232. Asynchronous, 10 or 11 bit words
Data Throughput (uncompressed).
1200 Baud - 38.4 Kbaud
Connector. RS232, DB9 female

Antenna
Standard thread SMA female
Supplied bench test antenna
Optional external omni directional or yagi antennas

Power
Supply Voltage. 10.5 - 18.0 VDC; 12 VDC wall mounted transformer
Optional 24 VDC
Transmit Current. 550ma @ 12 VDC @ 1 Watt
Receive Current. 200ma @ 12 VDC

Operating Modes
Point-to-point, point-to-multipoint, Store-and-Forward Repeater,
Repeater/Remote

Diagnostics
Serial Data Port. Stored signal strength, noise and disconnect information

Operating Environment
Temperature. -4° to 167°F (-40° to +75°C)
Humidity. 0 to 95% non-condensing humidity

Weight:
21.25 lbs (.57k)

Enclosure
Standard. NEMA 1; 18-gauge steel with mounting flanges; NEMA 4 available
Optional. DIN rail mount

Standard Enclosure Dimensions