SRM6220 Hybrid Ethernet-Serial Modem—
2.4 GHz ISM Band

Data-Linc Group's SRM6220 license-free wirelss hybrid, Ethernet-serial modem for the 2.4 GHz ISM band	Features * Hybrid wireless modem—Ethernet with serial tunneling (DF1, Modbus RTU etc.) * EtherNet/IP to DF1 bridging * Modbus TCP/IP to modbus RTU bridging * Legacy 2.4GHz SRM compatibility- single, "spare" backup * Field firmware upgradable * Web or SetLincTM software configurable via Ethernet or serial links * Serial port—RS232 * Pingable — user assignable IP address * Compatible with LincViewTM OPC RF network diagnostic software

Data-Linc Group’s SRM6220 wireless Ethernet-serial modem replaces the SRM6210E and provides users an advanced, state-of-the-art blending of Data-Linc’s successful SRM6000 serial and SRM6210E Ethernet modems. The SRM6220 offers Ethernet to serial, EtherNet/IP to DF1 and modbus TCP/IP to modbus RTU connectivity for hybrid integration of serial and Ethernet devices. Only one modem is required for this integration which reduces cost and increases efficiency. The accompanying, SetLincTM software makes SRM6220 configuration easy and intuitive.

SRM6220 meets or exceeds the prior technology. Its updated features and cutting-edge auxiliary microprocessor add a broad range of enhanced, user friendly features and capabilities. The SRM6220’s backward compatibility with the SRM6200E and SRM6210E Ethernet modems allows it to be used as a replacement. It can be used as a serial tunnel Master with SRM6000 modems with series 2.xx radio firmware.

Modem setup and configuration have been simplified by Data-Linc’s proprietary SetLinc software. Configuration via the Ethernet or the serial port (RS232) provides versatility. To further simplify installation and increase user confidence,
the SRM6220 is “ping-able.” Radio network communication can be readily determined by pinging the Master or the Remote— an invaluable troubleshooting feature for determining if the communication link is functioning.

Additional advantages of the SRM6220 include Ethernet bridging, selectable MAC (Media Access Control) address filtering and dual Ethernet/CAT5 connectors for straight or crossover cables. The radio network forms an Ethernet bridge between Master radio Ethernet devices and one or more Remote radio Ethernet devices. RF network performance is improved by a switchable MAC Filter in each radio that learns MAC addresses of Ethernet devices connected to its wired side and only forwards packets across the RF link of devices not on the wired side.

Like the prior SRM Family 900 MHz modems, the 25+ miles (40 km)* range offers superior reliability and performance in the license-free band. The SRM6220 utilizes the same high performance, ultra-reliable Smart SpectrumTM technology that ensures exceptional data integrity— even in high noise environments. It continues the SRM Family tradition of allowing each modem to be configured for Master, Remote, Repeater or Repeater/Remote mode. The SRM6220’s compact design with optional DIN rail clip, allows easy mounting. The front panel power and data connectors give the user immediate connectivity and front-located LED status lights provide direct visual access to critical diagnostic information.

*Greater range in optimal conditions with clear line-of-sight, Repeaters and/or higher gain antennas.

SRM6220-Unlicensed 900 MHz Wireless Hybrid Modem
Frequency Hopping Spread Spectrum
Specifications

Included
CD. SetLincTM configuration software, LincViewTM OPC RF network management software, User Manual
Antenna. Test antenna
Cable. CAT5 (7')
Power. Wall mount 115VAC supply, 12 VDC output

Operating Modes
Point-to-point and multipoint mode
Master, Repeater, Remote or Repeater/Remote

Interface
Ethernet.
One 10baseT (UTP)— straight and crossover CAT5s
Serial data port.
Serial-Linc RS232/RS485 screw terminal
Serial data tunneling via UDP or TCP/IP
Diagnostics port. RS232

Operating ranges
System gain. 138 dB
Distance. 25 miles (40 km) with omni antennas (with line-of-sight)

Transmitter
RF Output Power. 1 Watt (30dBm) maximum,
(10 programmable steps up to 1 Watt); 30dBm
Modulation. Frequency Hopping Spread Spectrum, GFSK
RF Data Rate. 144Kbps - 188 Kbs
Hop Patterns. 15 (user selectable)
Occupied Bandwidth. 230KHz
Error Correction. 32 bit CRC
RF Encryption. Substitution Dynamic Key

Receiver
Sensitivity. -108 dBm @ 10-6 raw BER
Selectivity. 40 dB @ fc ±230 KHz and 60dB @ fc ±460 KHz
Maximum data throughput. 115Kbps point-to-point mode
assuming 75% frequency availability

Antenna Interface
Standard. SMA connector
Optional. External omni directional or yagi Antenna
FCC power limit. 4 Watts EIRP (36dB) max at antenna
Impedance. 50 Ohms

Configuration
SetLincTM software or web browser

DC Power Requirements
8 Watts transmit peak
2 Watts receiving
10 to 28 VDC via screw terminal and via Ethernet using a
Data-Linc DC power injector

Diagnostics
Front panel LEDs. Power, RF Link, RF Out, RF In,
LAN Link, LAN Activity, Mode setup enabled status
LincViewTM OPC. Diagnostic software for real-time RF network
monitoring; via Ethernet (UDP) or serial Diagnostic port

Operating Environment
Temperature. -40° to 167°F (-40° to 75°C)
Humidity. 0-95% non-condensing

Enclosure
Standard. NEMA 1, 18 gauge steel; 2.35 X 3.75 X 8.1 in.
(6 X 9.5 X 20.6 cm) using mounting brackets
Optional. 2.35 X 3.76 X 6.3 in. (6 X 9.5 X 16 cm) using
DIN rail mounting

Weight
1.8 lb (0.82 kg)