Industrial rack mount chassis enclosure: Wireless Ethernet Modems 2.4-2.483 GHz ISM B for PLC slot mount

Contact us
Site Map

Wireless Modems

Ethernet Radio

902-928 MHz
PLC rack mount
Data sheet
SRM6200E-SLC

2.4-2.4835 GHz
PLC rack mount
Data sheet
SRM6300E-SLC

2.4-2.4835 GHz
for EU countries
Data sheet
SRM6310E-EU

2.4-2.4835 GHz
Modicon Quantum Form Factor chassis mount
Data sheet
SRM6310E-QTM

Ethernet Applications

LincView OPC Network Management Tool

Smart Spectrum FAQ

SRM FAQ

SRM6300E-SLC License-free Wireless Ethernet 2.4-2.4835 GHz Modem

Industrial Rack Mount Chassis Enclosure for Allen-Bradley SLC 500*

License-free wireless industrial PLC rack mount modem— operates in the 2.4-2.4835 GHz ISM (industrial/scientific/medical) band

Designed to mount in an Allen-Bradley SLC 500 Industrial rack mount chassis*

Rated range of up to 10 miles (16 km) with line-of- sight - farther with Repeaters and/or a high gain antennas

Employs Smart Spectrum^TM frequency hopping
technology for exceptional data integrity— even in high interference environments

Wirelessly connects Ethernet PLCs and workstations

Factory or field configured for your application— ensuring trouble-free installation

User configurable for Master, Remote, Repeater or Repeater/Remote mode

Front panel LEDs. Power, RF Link, RF In, RF Out, LAN In, LAN Out, LAN Link, LAN Collision, Overrun Error

Superior noise immunity, higher power output and
better receiver sensitivity compared to other 2.4
GHz wireless systems

Industrial rack mount wireless Ethernet radio modem

The wireless Ethernet 2.4 GHz radio modem (industrial PLC rack mount enclosure) for Allen-Bradley SLC 500, versions for GE Fanuc and Modicon PLCs also available

NET620— Serial to Ethernet Bridge

NET620, offers simple low cost bridging of serial and Ethernet devices.
Serial to Ethernet bridging
Allen Bradley EtherNet/IP to DF1
ModBus TCP/IP to ModBus RTU
TCP or UDP terminal server
Quick web browser or supplied Set-LincTM software setup
Easy configuration via serial or Ethernet port
No "special" PLC configuration for bridging
A compact design with versatile mounting options

Data-Linc Group's advanced NET620 allows the integration of serial connected devices into Ethernet networks without a complicated network interface. No special PLC or PC configuration needed to integrate DF1 or ModBus RTU devices into EtherNet/IP or ModBus TCP/IP networks. When using the NET620 to bridge DF1 or ModBus RTU, the application is configured as if the serial device was Ethernet. The NET620 does the rest. Additionally, when used as a terminal server, any serial port redirect software will work (including "Freeware" software)-no proprietary software required. Configuring the NET620 is nearly effortless using either the supplied Set-Linc utility software or a web browser. In most cases all that is needed is to set the IP address and the serial port speed.

Power is provided by a three position terminal block with a input range of 10 to 28 VDC. The NET620 enclosure has the same footprint as the SRM6x20 with universal mounting flanges or optional DIN rail clips for flexible installation

The NET620 allows serial and Ethernet devices to communicate seamlessly without expensive interfacing equipment. The NET620 benefits the "bottom line" by making network design easier, more efficient and more cost-effective- saving money, time and effort.

Download a printable pdf (761 KB) version of this NET620 data sheet.
To read pdf files you need to get Adobe Acrobat Reader and install it on your PC.

^ Top of Page ^

			NET620 Specifications Included CD. Set-LincTM Configuration software and User Manual Cable. Cat5 (7') Power. Wall mount 115 VAC supply, 12 VDC output Interface Ethernet. One 10BaseT (UTP) - Straight and crossover Serial port. RS232 and RS485 Configuration Set-Linc software or Web browser DC power requirement 10 to 28 VDC via screw terminal and via Ethernet using Data-Linc DC power injectors Operating Environment Temperature. -40° to 167° F (-40° to 75° C) Humidity 0 to 95% non-condensing Enclosure Standard: NEMA 1, 18 gauge steel; 2.75 X 3.75 X 8.1 in. (7 X 9.5 X 20.6 cm) using mounting brackets Optional: 2.38 X 4.25 X 6.38 in (6 X 10.8 X 16.2 cm) using DIN rail mounting Weight 1.5 lb (0.68 kg) ^ Top of Page ^
			Antenna Standard thread SMA female Supplied bench test antenna. Optional external omni directional or yagi available Power Input Voltage Requirements. 12 VDC; 115 VAC to 12 VDC wall mount transformer provided— 24 VDC and/or backplane power available Connector. Barrel jack standard— latching screw terminal supplied with 24 volt option RF Output Power. 500 mW (selectable in ten step increments) Transmit Current (Peak). 700 mA @ 12 VDC Receive Current. 100mA @ 12 VDC Operating Modes Point-to-point, point-to-multipoint, Store-and-Forward Repeater, Remote/Repeater Configuration Serial Port 19.2 Kbaud terminal based (6 pin mini DIN connection) Diagnostics Front Panel LEDs. Power, RF Link, RF In, RF Out, LAN In, LAN Out, LAN Link, LAN Collision, Overrun Error Serial Port Data. Stored signal strength, noise and disconnect information Operating Environment Standard Temperature. 0° to 60° C (32° to 140° F) Humidity. 0-95% non-condensing humidity Weight .34 kg (.7 lb) Enclosure Single 1746 rack slot Industrial rack mount chassis enclosures for GE Fanuc and Modicon PLCs also available. Contact Data-Linc for more information. For a stand-alone license-free wireless Ethernet modem, see the SRM6310E.

			Industrial Rack Mount Enclosure Part Numbers SRM6300E-SLC SLC industrial rack mount Ethernet Radio Modem with 12 VDC/115 VAC wall mount transformer SRM6300E-SLC/24V SLC industrial rack mount Ethernet Radio Modem with 24 VDC option having two-position locking terminal connector and 24 VDC/115 VAC wall mount transformer for bench testing SRM6300E-SLC/BP SLC industrial rack mount Ethernet Radio Modem with backplane power option and supplied with 12 VDC/115 VAC wall mount transformer for bench testing

			P/N 155-09964-004 rev 10/04 Specifications subject to change without notice. Smart Spectrum is a trademark of Data-Linc Group. All other trademarks are the property of their respective owners.

		^ Top of Page ^

Products		Features & Benefits \| Focus Item \| Product Selection Guides \| Catalog \| PDF Library \| Order Information \| FAQ
Tech Resources		Engineering Specifications \| Articles & Technical Papers \| Installation Information
Partners		GE Fanuc \| Omron \| Rockwell Automation \| Schneider Electric \| Siemens \| Technology Partners
Industries		Security \| Traffic \| and other industry application notes and diagrams
Sales Channels		Distributors \| System Integrators \| OEMs
News		Tradeshows and Events \| Press Releases \| Newsletters
About Us		Overview \| Office Locations/Contact Information

		Data-Linc Group representatives in Asia Pacific. Wired & Wireless Solutions International Head Office Asia Pac : Level 7, of 6 Help St, Chatswood, Sydney, NSW, Australia, 2067 Tel +61 2 9412 2100 • Fax +61 2 9403 7900•
© 1996-2006 Data-Linc Group. All rights reserved.

050104

SRM6300E-SLC License-free Wireless Ethernet 2.4-2.4835 GHz Modem

Industrial Rack Mount Chassis Enclosure for Allen-Bradley SLC 500*

NET620 Specifications

Industrial Rack Mount Enclosure Part Numbers