Belden’s BWAP-200 Access Points

Belden’s BWAP-200 Access Points are the point- of-network-entry for users of the Belden Wireless Solution. Elegant in their simplicity, these APs provide a true plug-and-play architecture for implementing large-scale, enterprise-grade WLANs.

They are powered from industry-standard PoE (Power over Ethernet – IEEE 802.3af) and they support any off-the-shelf wireless network interface card (NIC).

Belden APs, combined with Belden BWS-8008 / BWS-8024 Switches, embody the Belden Wireless Solution. Using Belden’s “Channel Blanket Technology,” this wireless LAN provides seamless mobility with no roaming latency, no co-channel interference, and the ability to design for a guaranteed and predictable level of service.

Belden’s APs require no set-up or configuration. These system components are just radios — with no software, no storage, no “smarts.” All traffic decisions are made by the centralized 8- or 24-port Belden Switch.

Belden’s BWAP-200 Access Points are client agnostic; clients don’t associate with any access point. Instead, he APs act as a conduit to rapidly funnel all traffic between switch and client. The net effect is ubiquitous, interference-free coverage, consistent bandwidth, and zero-latency mobility — all with the resilience of a wired connection.

In the Belden Wireless Solution, when adds, drops and changes occur, simply add or remove APs as needed. No network re-configuration or re-planning is needed. Adding or removing an AP has is needed. Adding or removing an AP has no effect on an existing set-up.

Click here to download BWAD-200 Access Point