| Product |
WLg-SWITCH |
| |
 |
| Functions |
8-port Ethernet " Ethernet switch, 120W POE injector,
WiFi bridge / bridge router / access Point / repeater (WDS) |
| Format |
Pannel or din Rail metal enclosure, IP30 seal rating |
| Dimensions Weight |
L:110 x W:50 x H:151 mm
650 g |
| Number of serial channels |
- |
| MODBUS / PROFINET / Ethernet/IP support |
MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway |
| Windows COM port redirection |
- |
| Serial Link |
- |
| Maximum Speed |
108 Mbps |
| Connections type |
8 x RJ45 connectos for Ethernet, screw-in terminal for the power supply |
| Connection cable |
- |
| Ethernet link |
8-port 100 Base TX Ethernet switch, 10/100 auto-sensing, auto MDI/MDIX |
| Radio link |
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG |
| Frequency range |
2.4 / 5 / 5.4 GHz |
| High power RF card option |
 400 mW |
| Radio Modem (AD HOC) mode |
Bridge mode |
| Rapid roaming |
< 50 mS |
| Antennas |
2 omnidirectionnal 2 dBi 2.4 / 5 GHz antennas |
| External antenna connector for long range communications |
2 RPSMA Jack connectors (reverse SMA femelle) |
| Nominal range with built-in antennas |
300m, open field |
| Security |
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control |
| Number of WiFi clients in AP mode |
30 |
| Administration |
Web browser
SNMP, ACKSYS NDM |
| Default signaling |
Relay output warning: power failure, LAN or WLAN connection failure, watchdog |
| Data plug for easy configuration save & restore (C-KEY) |
|
| Power supply |
DC dual input +9VDC to +72VDC |
| Power consumption |
10W typical (injector not comprised) |
| Power injector POE / PSE |
On the 8 Ethernet ports, requires a +48VDC (120W) power source |
| Environnement |
Operating temperature from -25°C to +70°C |
| LED signaling |
|
| RF level display |
Bridge mode |
